Stainless Steel JIC Fitting - Hydraulic Pipe Fitting Adapter
JIC fittings, defined by the SAE J514 and MIL-DTL-18866 standards, are a type of flare fitting machined with a 37-degree flare seating surface.
TONY Fluid specilized in fluid control for 20 years,products include stainless steel pipe fitting,tube fitting,hydraulic fitting,ball valve,check valve,needle valve,hydraulic hose,hose clamp and so on.Contact Email: [email protected]
SAE100R Series Inner Steel Braided Hydraulic Rubber Hose - Hose & Fittings Assemblies
SAE 100R2 hydraulic rubber hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It consists of an inner tube of oil-resistant synthetic rubber,
Stainless Steel 304/316 Split Check Valve - NPT BSP G Female Thread Non Return Valve
The valve body of the split check valve is designed as a separable front-end valve body and a back-end valve body, which are respectively located at the front and rear ends of the medium flow direction. After separation,
6000Psi NPT BSP G Female Thread Cross Pipe Fitting - SS304 SS316 Four Way Pipe Fitting
NPT BSP G female thread cross is designed to connect four pipes in the pipeline system. It is a four way pipe fitting with equal diameter external thread at each ends.
6000Psi NPT BSP G Female Thread Tee
TONY's female thread tee is designed to connect three pipes in the pipeline system. The maximum working pressure of this type of pipe fitting can reach 6000 psi, and it is made of stainless steel, suitable for high p
High Pressure 6000Psi Male Street Tee
Male Street Tee pipe fittings are used for pipe thread connections, it is widely used in industrial.The pipe fittings has a maximum working pressure of 6000 psi and is made of stainless steel. It is suitable for high pre
High Pressure 6000Psi Male Branch Tee - 3 Way SS304 SS316 Pipe Fitting
Male Branch Tee pipe fitting are used to connect three pieces of threaded material, it is widely used in pipeline system.The pipe fittings has a maximum working pressure of 6000 psi and is made of stainless steel. It is
Food & Beverage Stainless Steel Butt Weld Sanitary Butterfly Valves
Manual Sanitary Butterfly Valves is manual operated sanitary butterfly valves, made in stainless steel 304, 316L, with connection tri-clover, butt-weld, male/female threaded, flanged etc. Manual operated is a good choice
Stainless Steel Socket Weld Tee - High Pressure Weld Pipe Fitting
Socket Weld Tee are used for pipe weld connections, it is widely used in industrial.The pipe fittings has a maximum working pressure of 10000 psi and is made of stainless steel. It is suitable for high pressure and corro
TONY Stainless Steel NPT BSP G Thread Swivel Pipe Union
Swivel Pipe Union are used to connect two pieces of threaded valves or pipes in pipeline system.The maximum working pressure of TONY's Swivel Pipe Union can reach 10000 psi, and the stainless steel material makes it
TONY Stainless Steel Female Thread Elbow Pipe Fitting
Female Thread Elbow Pipe Fitting are used to connect two pieces of threaded valves or pipes in pipeline system.The maximum working pressure of TONY's Female Thread Elbow can reach 10000 psi, and the stainless steel m
High Pressure 6000Psi Male Elbow Pipe Fitting
Male Elbow pipe fittings are used for pipe thread connections, it is widely used in industrial.The pipe fittings has a maximum working pressure of 6000 psi and is made of stainless steel. It is suitable for high pressure
.jpg)