TONY Sanitary Tri Clamp Electric Actuator Butterfly Valve - Stainless Steel Motorized Ball Valve
Introduction of Sanitary Tri Clamp Electric Actuator Butterfly Valve
The 3 piece design allows for the center part of the valve containing the ball, stem seats to be easily removed from the pipeline. This facilitates efficient cleaning of deposited sediments, replacement of seats and gland packings, polishing out of small scratches on the ball , all this without removing the pipes from the valve body . The design concept of a three piece valve is forit to be repairable.
The 3 piece design allows for the center part of the valve containing the ball, stem seats to be easily removed from the pipeline. This facilitates efficient cleaning of deposited sediments, replacement of seats and gland packings, polishing out of small scratches on the ball , all this without removing the pipes from the valve body . The design concept of a three piece valve is forit to be repairable.
Price:
$ 142 - 680
Brand: TONY
Material: Stainless Steel 304/316
Size Range: DN15 - DN100
Connectiong Type: Tri Clamp
Product Description
Video
Introduction of Sanitary Tri Clamp Electric Actuator Butterfly Valve
The 3 piece design allows for the center part of the valve containing the ball, stem seats to be easily removed from the pipeline. This facilitates efficient cleaning of deposited sediments, replacement of seats and gland packings, polishing out of small scratches on the ball , all this without removing the pipes from the valve body . The design concept of a three piece valve is forit to be repairable.
Installation Instruction
1. Verify that the valve breakaway torque is less than the rated output torque of the actuator.
2. Any mechanical stops that would interfere with the operation of the actuator must be removed before installation of the actuator, i.e. lever, travel stops, etc.
3. The actuator output coupling must be centered with the valve stem to prevent side loading, which causes premature stem packing wear.
4. To use the manual override feature (identified on cover label), the override shaft must be pressed down firmly at least 1/4"in order to disengage the motor from the gears. The manual override is not designed to overcome torque in
excess of the rated torque of the actuator. Serious damage to the gear system may result from excessive turning force on the manual override.
5. This Series actuator may be mounted in any position, i.e. horizontal, upside down. If the conduit entrance points upward, conduit piping must be oriented as to prevent condensation from entering the actuator from the conduit pipe.
The 3 piece design allows for the center part of the valve containing the ball, stem seats to be easily removed from the pipeline. This facilitates efficient cleaning of deposited sediments, replacement of seats and gland packings, polishing out of small scratches on the ball , all this without removing the pipes from the valve body . The design concept of a three piece valve is forit to be repairable.
Installation Instruction
1. Verify that the valve breakaway torque is less than the rated output torque of the actuator.
2. Any mechanical stops that would interfere with the operation of the actuator must be removed before installation of the actuator, i.e. lever, travel stops, etc.
3. The actuator output coupling must be centered with the valve stem to prevent side loading, which causes premature stem packing wear.
4. To use the manual override feature (identified on cover label), the override shaft must be pressed down firmly at least 1/4"in order to disengage the motor from the gears. The manual override is not designed to overcome torque in
excess of the rated torque of the actuator. Serious damage to the gear system may result from excessive turning force on the manual override.
5. This Series actuator may be mounted in any position, i.e. horizontal, upside down. If the conduit entrance points upward, conduit piping must be oriented as to prevent condensation from entering the actuator from the conduit pipe.
Previous: TONY Electric Actuator Sanitary Ball Valve - Stainless Steel Three Way Tri Clamp Ball Valve
Next: TONY Stainless Steel Sanitary Pneumatic Butterfly Valve - Tri Clamp Food Grade Pneumatic Butterfly Valve
product inquiry
.jpg)