SS304 Two Way Pneumatic Actuator Ball Valve - Sanitary Pnematic Ball Valve
Introduction of Pneumatic Actuator Ball Valve
The 3 piece design allows for the center part of the valve containing the ball, stem& seats to be easily removed from the pipeline. This facilitates efficient cleaning of deposited sediments replacement of seats and gland packings, polishing out of small scratches on the ball, all this without removing the pipes from the valve body. The design concept of a three piece valve is forit to be repairable.
The 3 piece design allows for the center part of the valve containing the ball, stem& seats to be easily removed from the pipeline. This facilitates efficient cleaning of deposited sediments replacement of seats and gland packings, polishing out of small scratches on the ball, all this without removing the pipes from the valve body. The design concept of a three piece valve is forit to be repairable.
Price:
$ 142 - 680
Brand: TONY
Material: Stainless Steel 304/316
Size Range: DN15 - DN100
Connectiong Type: Tri Clamp
Product Description
Video
Introduction of Pneumatic Actuator Ball Valve
The 3 piece design allows for the center part of the valve containing the ball, stem& seats to be easily removed from the pipeline. This facilitates efficient cleaning of deposited sediments replacement of seats and gland packings, polishing out of small scratches on the ball, all this without removing the pipes from the valve body. The design concept of a three piece valve is forit to be repairable.
Maintenance
Tightening the seal between the valve and the actuator.
Remove the four bolts undemeath the actuator. Separate the actuator from the valve .
Tighten the nut on the top of the valve body.
Place the actuator back on the valve and screw everything back into place.
Tightening the seals between the valved the inlet / outlet ports.
Remove the torque bolts and check for any debrise or demage of the gasket.
Use a torque wrench or other consistent method of tightening the torque bolts to reconnect the inlet and outlet ports .
The 3 piece design allows for the center part of the valve containing the ball, stem& seats to be easily removed from the pipeline. This facilitates efficient cleaning of deposited sediments replacement of seats and gland packings, polishing out of small scratches on the ball, all this without removing the pipes from the valve body. The design concept of a three piece valve is forit to be repairable.
Maintenance
Tightening the seal between the valve and the actuator.
Remove the four bolts undemeath the actuator. Separate the actuator from the valve .
Tighten the nut on the top of the valve body.
Place the actuator back on the valve and screw everything back into place.
Tightening the seals between the valved the inlet / outlet ports.
Remove the torque bolts and check for any debrise or demage of the gasket.
Use a torque wrench or other consistent method of tightening the torque bolts to reconnect the inlet and outlet ports .
Previous: Sanitary Pneumatic Ball Valve - Stainless Steel Two Way Pneumatic Actuator Ball Valve
Next: Stainless Steel 3 Way Sanitary Pneumatic Ball Valve - Tri Clamp Quick Connection
product inquiry
.jpg)